TERRASIT EPS 200 panels are used for flat roofs, floors requiring higher compressive loads, underfloor heating, and refrigerated storage facilities. Panels are installed using mechanical fastening or free installation. When installing, instructions must be followed to avoid unnecessary damage, and achieve maximum insulating power.
The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 (Self-extinguishing)
EPS-EN 13163-L (3) -N (3) -T (2) -S (5) -P (5) -BS250-CS (10) 200-DS (N) 5-DS (70, -) 3
DOWNLOAD Terrasit EPS 200 (technical specifications)
| Properties of Terrasit EPS 200 | EPS EN | Test method EN | Value/Class | Standardized technical specification | |||||||||||||
| Dimensions | – | 822 | 1000x500xd mm | BAS EN ISO 13163 +A2:2018EN 13163:2015HRN EN 13163:2015 | |||||||||||||
| Length | L | 822 | ± 3 mm | ||||||||||||||
| Width | W | 822 | ± 3 mm | ||||||||||||||
| Thickness | T | 823 | ± 2 mm | ||||||||||||||
| Squareness | S | 824 | ± 5 mm | ||||||||||||||
| Flatness | P | 825 | ± 5 mm | ||||||||||||||
| Thermal conductivity (λ D) | – | 12667 | 0,034 W/mK | ||||||||||||||
| Fuel Classification EN 13501 | – | 13501-1 | Class E | ||||||||||||||
| Compressive stress at 10% deformation | CS(10) | 826 | 200 kPa | ||||||||||||||
| Long-lasting water absorption during immersion | WL | 12087 | 2 % | ||||||||||||||
| Stability of changes under lab conditions | DS(N) | 1603 | ± 0,5 % | ||||||||||||||
| Stability of changes under certain conditions | DS(70-1) | 1604 | ≤ 3 % | ||||||||||||||
| EPS-EN 13163-L3-W3-T2-S5-P5-BS115-CS(10)200-DS(N)5-DS(70,-)3-WL(T)2 | |||||||||||||||||
| Thermal resistance by thickness in mm – RD[m2K/W] | |||||||||||||||||
| 10 | 20 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 140 | 150 | 160 | 180 | 200 | 220 | 240 | 250 | 300 |
| 0,28 | 0,56 | 0,83 | 1,11 | 1,39 | 1,67 | 2,22 | 2,78 | 3,33 | 3,89 | 4,17 | 4,44 | 5,00 | 5,56 | 6,11 | 6,67 | 6,94 | 8,33 |