TERRATERMAL ALPHA

Terratermal Alpha is an underfloor heating panel. It is available in a wide range of pressure compressive strengths and thicknesses, thermal values, and resistances to meet the needs of most projects. The combination of Styrofoam Insulation (EPS) with highly resistant polystyrene (HIPS) film makes it a strong and flexible panel. The panel is composed of solid […]

TERRATERMAL STAR

Terratermal Star is an underfloor heating panel designed for spaces with minimum size and height standards, and larger compressive loads. Laying is easier due to a unique edge design. Plug design supports tubes with a diameter of 14 – 16 mm with 50mm spacing. It is installed under cement screed, supporting a load up to 3,000 […]

TERRATERMAL COMFORT

Terratermal Comfort is an underfloor heating panel made of hard styrofoam, vacuum coated with protective foil. Terratermal Comfort is designed for spaces with minimum size and height standards, and larger compressive loads. Panel supports pipes with a diameter of 16 – 20mm with a minimum spacing of 7.5 cm. Unique edge design allows boards to […]

TERRACOKL

TERRACOKL are water-repellent panels expanded in a mold. TERRACOKL is used for the insulation of the bottom of the facade above the ground level. The product is under ETICS (External thermal insulation composite system) ETAG 004. Grid on both sides of the panel increases the performance, and is installed using adhesive mortars. Panels are installed using […]

TERRACOKL GRAPHITE

TERRACOKL GRAPHITE are water-repellent panels expanded in a mold. TERRACOKL GRAPHITE is used for the insulation of the bottom of the facade above the ground level. The product is under ETICS (External thermal insulation composite system) ETAG 004. Panels are installed using special adhesives and mechanical fixing. When installing, instructions and project planning must be […]

XPS 300 NI

XPS 300 NI are extruded polystyrene panels, with a rough surface (“wafer”) and flat edges they are installed by standard gluing or with poured concrete. XPS 300 NI panels are used for:• insulation of foundation footings• roof overhangs on pitched roofs• prevention of thermal bridges plate size (mm): 1250×600 net area (m2): 0,75 thickness (mm): […]

XPS 300 NL

XPS 300 NL are extruded polystyrene panels, with a rough surface (“wafer”) and flat edges they are installed by standard gluing or with poured concrete. XPS 300 NL panels are used for:• insulation of foundation footings• roof overhangs on pitched roofs• prevention of thermal bridges XPS 300 NL panels are used for:• insulation of foundation footings• […]