STIROTRAK

STIROTRAK is used for sound insulation as a separating layer between the floor or in floating floor systems. Stirotrak is installed using PU glue or free installation. When installing, instructions must be followed to avoid unnecessary damage, and achieve maximum insulating power. STIROTRAK is available in widths from 50cm to 100cm. The product is in accordance […]

EPS ANGLE BATTEN

EPS angle batten is used for preventing the bending of welding strips at an acute angle at the transition from the horizontal to the wall.

EPS PROFILES

Facade profiles are used for roof overhangs, decorative frames on the facade around the windows and details on the corners with no thermal bridges. EPS PROFILES are customizable, they can be copied for the restoration of old buildings. Decorative EPS profiles are coated with a solid core layer on the visible side. This core layer provides […]

EPS GRANULATE

EPS GRANULATE is used for the preparation of lightweight insulating concrete. It helps building structures in places with low compressive strength loads. Lightweight screed with direct laying of ceramics, arched ceilings with wooden beams and attic, and for watering installations in floors. EPS GRANULATE has an extremely low weight of fi = 200 kg / m3, […]

EPS REGENERATE

EPS REGENERATE is used for the preparation of lightweight insulating concrete. It helps building structures in places with low compressive strength loads. Lightweight screed with direct laying of ceramics, arched ceilings with wooden beams and attic, and for watering installations in floors. EPS GRANULATE has an extremely low weight of fi = 200 kg / m3, […]

EPS COVER CAPS

EPS cover caps are used on thermal insulation panels, covering anchoring holes. type of styrofoam: EPS F SUPER / Grafit size: ∅ 70 x 17 mm unit of measure: pcs PACKAGING bag: 500 pcs thermal conductivity λD: 0,039 W/mK0,032 W/mK

ANCHORS

Anchors are used to additionally secure EPS panels to wall surface. They are used on buildings with a height of over 8 meters, and on less adhering surfaces. composition: plastic cartridge with a disc and a plastic wedge consumption: 4-6 pcs/m2 unit of measure: pcs PACKAGING bag: 500 pcs thermal conductivity λD: 0,039 W/mK0,032 W/mK

PLASTIC TAPS

Plastic taps are used for dimpling EPS panels for facades, which are covered with ESA plugs of ø 70×17 mm. They are used in conjunction with a hand-held drill max. 750 r / min. composition: plastic cartridge with a disc and a plastic wedge