Izbornik jezika

Bosanski | English | Deutsch

Putanja

Home / PRODUCTS / Products

Products

EPS Plates

TERRASIT EPS 30, EPS 50
Image 152

Cut panels of expanded polystyrene TERRASIT EPS 30, EPS 50 are used for thermal insulation in places where there is no requirement of load capacity (attics, floors and other places with smaller loads), the facades coated with a panel of façade bricks. Plates are installed with respect to the types of bonding, using mechanical fastening or free installation. When installing, we must follow the instructions for installation, the applicable legislation and codes of practice.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (self-extinguishing)

 

EPS-EN 13163-L (3) -N (3) -T (2) -S (5) -P (5) -BS50-DS (N) 5

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png
plate thickness: 1cm - 30cm
panel size: 100 x 50cm
unit of measure: m2
PACKAGING  
packages in PE foil: cca 0.30m2
 pallet:  
 thermal conductivity λD:

0,044 W/m.K
0,043 W/m.K

 compressive strength:

≥30 kPa (10% def.)
≥50 kPa (10% def.)

allowed even load:

600 kg/m2
1000 kg/m2

Certificates:  ITT Report, Institute GIT Tuzla

TERRASIT EPS 70
Image 147

Cut panels of expanded polystyrene TERRASIT EPS 70 are used for floors with thermal insulation of smaller thickness and with smaller loads, such as attics, and facades with façade brick envelopes. Plates are installed depending on to the manner of use of bonding, mechanical fastening or free installation. When installing, we must follow the instructions for installation, the applicable legislation and codes of practice.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (Self-extinguishing)

 

EPS-EN 13163-L (3) -N (3) -T (2) -S (5) -P (5) -BS115-CS (10) 70 DS (N) 5

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png
plate thickness: 1cm - 30cm
panel size: 100 x 50cm
unit of measure: m2
PACKAGING  
packets in PE foil: cca 0.30m2
pallet:  
 thermal conductivity λD:

0,039 W/m.K

 compressive strenght:

≥70 kPa (10% def.)

allowed even load:

1400 kg/m2

Certificates:  ITT Report, Institute GIT Tuzla

TERRASIT EPS 100
Image 148

Cut panels of expanded polystyrene TERRASIT EPS 100 are used for thermal insulation of floors, flat roofs, attics, underfloor heating, and refrigerated facilities. Plates are installed depending on the manner of use of bonding, mechanical fastening or free installation. When installing, we must follow the instructions for installation, the applicable legislation and codes of practice.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (self-extinguishing)

EPS-EN 13163-L(3)-W(3)-T(2)-S(5)-P(5)-BS150-CS(10)100-DS(N)5-DS(70,-)3

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate thickness: 1cm - 30cm
 plate size: 100 x 50cm
unit of measure: m2
PACKAGING  
packages in PE foil: cca 0.30m2
pallet:  
 thermal conductivity λD:

0,037 W/m.K

compressive strenght:

≥100 kPa (10% def.)

allowed even load:

2000 kg/m2

Certificates:  ITT Report, Institute GIT Tuzla

TERRASIT EPS 120
Image 149

Cut panels of expanded polystyrene TERRASIT EPS 120 are used for thermal insulation of floors, flat roofs, attics, underfloor heating, and refrigerated facilities. Plates are installed depending on the manner of use of bonding, mechanical fastening or free installation. When installing, we must follow the instructions for installation, the applicable legislation and codes of practice.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (Self-extinguishing)

 

EPS-EN  13163-L(3)-W(3)-T(2)-S(5)-P(5)-BS150-CS(10)100-DS(N)5-DS(70,-)3

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate thickness: 1cm - 30cm
 plate size: 100 x 50cm
unit of measure: m2
PACKAGING  
packages in PE foil: cca 0.30m2
pallet:  
thermal conductivity λD:

0,036 W/m.K

compressive thickness:

≥100 kPa (10% def.)

allowed even load:

2000 kg/m2

Certificates:  ITT Report, Institute GIT Tuzla

TERRASIT EPS 150
Image 145

Cut panels of expanded polystyrene EPS TERRASIT 150 are used for thermal insulation of flat roofs (heavy loads, walkways and service areas), floors with large thicknesses of thermal insulation, floors with higher loads, insulation of cold attics with occasional walking surfaces. Plates are installed depending on the manner of use of bonding, mechanical fastening or free installation. When installing, we must follow the instructions for installation, the applicable legislation and codes of practice.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (Self-extinguishing)

EPS-EN 13163-L(3)-W(3)-T(2)-S(5)-P(5)-BS200-CS(10)150-DS(N)5 DS(70,-)3

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate thickness: 1cm - 30cm
 veličina ploča: 100 x 50cm
panel size: m2
PACKAGING  
 packages in PE foil: cca 0.30m2
 pallet:  
 thermal conductivity λD:

0,034 W/m.K

 compressive strenght:

≥150 kPa (10% def.)

allowed even load:

3000 kg/m2

Certificates:  ITT Report, Institute GIT Tuzla

TERRASIT EPS 200
Image 146

Cut panels of expanded polystyrene EPS TERRASIT 200 are used for thermal insulation of flat roofs, floors with higher loads, floor heating, and refrigerated facilities. Plates are installed due to the manner of use of bonding, mechanical fastening or free installation. When installing, we must follow the instructions for installation, the applicable legislation and codes of practice.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (Self-extinguishing)

EPS-EN 13163-L (3) -N (3) -T (2) -S (5) -P (5) -BS250-CS (10) 200-DS (N) 5-DS (70, -) 3

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate thickness: 1cm - 30cm
 panel size: 100 x 50cm
 unit of measure: m2
PACKAGING  
packages in PE foil: cca 0.30m2
 pallet:  
thermal conductivity λD:

0,034 W/m.K

 compressive strenght:

≥200 kPa (10% def.)

allowed even load:

4000 kg/m2

Certificates:  ITT Report, Institute GIT Tuzla

Facade Panels

TERRASIT EPS F GRAPHITE
Image 133

Facade EPS boards with increased thermal power use TERRASIT EPS F GRAPHITE thermal insulation in ETICS façade systems in accordance with ETAG 004. Plates are installed with the facade adhesives or additional mechanical fixing. When installing, we must adhere to the project and instructions for installing the façade system, legal regulations and rules of the profession.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (self-extinguishing). Coated outer wall facade system ETICS achieves Class E, reaction to fire.

 

EPS-EN 13163-L(2)-W(2)-T(1)-S(2)-P(5)-BS100-DS(N)2 DS(70,-)3-TR100

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate thickness: 1cm - 30cm
panel size: 100 x 50cm
unit of measure: m2
PACKAGING   
packages in PE foil: cca 0.30m2
pallet:  
thermal conductivity λD:

0,032 W/m.K

resistance to layering :

≥TR100

Certificates:  ITT Report, Institute GIT Tuzla, ETAG 004, REGULATION (EU) br. 305/2011 SIA 279

TERRASIT EPS F PROFESSIONAL
Image 150

Facade panels of expanded polystyrene TERRASIT EPS F PROFESSIONAL are used for thermal insulation in facade systems ETICS according to ETAG 004. The plates are installed using facade adhesives or additional mechanical fixing. When installing, we must adhere to the project and instructions for installing the façade system, legal regulations and rules of the profession.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (self-extinguishing). Coated outer wall facade system ETICS achieves Class E, reaction to fire

 

EPS-EN  13163-L(2)-W(2)-T(1)-S(2)-P(5)-BS115-DS(N)2-DS(70,-)1-TR150

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate thickness: 1cm - 30cm
panel size: 100 x 50cm
unit of measure: m2
PACKAGING   
packages in PE foil: cca 0.30m2
pallet:  
 thermal conductivity λD:

0,036 W/m.K

 resistance to layering:

≥TR150

Certificates:  ITT Report, Institute GIT Tuzla, ETAG 004, REGULATION (EU) br. 305/2011

TERRASIT EPS F SUPER
Image 153

Facade panels of expanded polystyrene TERRASIT EPS F SUPER are used for thermal insulation of facade systems ETICS according to ETAG 004. The plates are installed using facade adhesives or additional mechanical fixing. When installing, we must adhere to the project and instructions for installing the façade system, legal regulations and rules of the profession.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (self-extinguishing). Coated outer wall facade system ETICS achieves Class E, reaction to fire.

 

EPS-EN  13163-L(2)-W(2)-T(1)-S(2)-P(5)-BS115-DS(N)2-DS(70,-)1-TR150

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png
plate thickness: 1cm - 30cm
panel size: 100 x 50cm
unit of measure: m2
PACKAGING  
packages in PE foil: cca 0.30m2
pallet:  
 thermal conductivity λD:

0,037 W/m.K

resistance to layering:

≥TR150

Certificates:  ITT Report, Institute GIT Tuzla, ETAG 004, REGULATION (EU) br. 305/2011

TERRASIT EPS F CLASSIC
Image 151

Facade panels of expanded polystyrene EPS F TERRASIT CLASSIC are used for thermal insulation of facade systems ETICS according to ETAG 004. The plates are installed using facade adhesives or additional mechanical fixing. When installing, we must adhere to the project and instructions for installing the façade system, legal regulations and rules of the profession.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (self-extinguishing). Coated outer wall facade system ETICS achieves Class E, reaction to fire

 

EPS-EN  13163-L(2)-W(2)-T(1)-S(2)-P(5)-BS100-DS(N)2-DS(70,-)1-TR100

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate thickness: 1cm - 30cm
 panel size: 100 x 50cm
unit of measure: m2
PACKAGING  
packages in PE foil: cca 0.30m2
pallet:  
thermal conductivity λD:

0,038 W/m.K

resistance to layering:

≥TR100

Certificates:  ITT Report, Institute GIT Tuzla, ETAG 004, REGULATION (EU) br. 305/2011

TERRASIT EPS F ECONOMIC
Image 154

Facade panels of expanded polystyrene TERRASIT EPS F ECONOMIC are used for thermal insulation of ETICS facade systems according to ETAG 004. The plates are installed using facade adhesives or additional mechanical fixing. When installing, we must adhere to the project and instructions for installing the façade system, legal regulations and rules of the profession.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (self-extinguishing). Coated outer wall facade system ETICS achieves Class E, reaction to fire

 

EPS-EN  13163-L(2)-W(2)-T(1)-S(2)-P(5)-BS100-DS(N)2-DS(70,-)1-TR100

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate thickness: 1cm - 30cm
panel size: 100 x 50cm
unit of measure: m2
PACKAGING  
packages in PE foil: cca 0.30m2
 pallet:  
 thermal conductivity λD:

0,039 W/m.K

resistance to layering:

≥TR100

Certificates  ITT Report, Institute GIT Tuzla, ETAG 004, REGULATION (EU) br. 305/2011

TERRACOKL
Image 134

Water-repellent facade panels TERRACOKL are expanded in a mold, used for insulation of "hindrance" – bottom of the facade above the ground level, in ETICS facade systems according to ETAG 004, for isolation of "pork shoulder" AB board edges in balconies and roof overhangs. Grid on both sides of the plate increases the adhesion with mortars. Plates are installed using facade adhesives or mechanical fasteners. When installing, we must adhere to the project and instructions for installing the façade system, legal regulations and rules of the profession.

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (self-extinguishing). Coated outer wall facade system ETICS achieves Class E, reaction to fire.

BAS-EN 13163-L(2)-W(2)-T(2)-S(2)-P(5)-BS150-CS(10)100-DS(N)2-DS(70,-)3-TR150-WL(T)2

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate thickness: 2cm - 20cm
panel size: 100 x 50cm
unit of measure: m2
PACKAGING  
packages in PE foil: cca 0.30m2
pallet:  
thermal conductivity λD:

0,037 W/m.K

 compressive strenght:

≥TR150

water absorption:

WL(T)2


TERRACOKL GRAFIT
Image 135

Water-repellent facade panels TERRACOKL GRAFIT with increased heat power are expanded in the mold, used for the isolation "hindrance" – bottom of facade above the ground level, in facade systems ETICS according to ETAG 004, for isolation of "pork shoulder", AB plate edges, balconies and roof overhangs. Plates are installed using facade adhesives or additional mechanical fixing. When installing, we must adhere to the project and instructions for installing the façade system, legal regulations and rules of the profession.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102 (self-extinguishing). Coated outer wall facade system ETICS achieves Class E, reaction to fire.

 

EPS-EN 13163-L(2)-W(2)-T(2)-S(2)-P(5)-BS150-CS(10)100*-DS(N)2-DS(70,-)3-TR150

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate thickness: 2cm - 18cm
panel size: 100 x 50cm
unit of measure: m2
PACKAGING  
packages in PE foil: cca 0.30m2
pallet:  
thermal conductivity λD:

0,031 W/m.K

compressive strenght:

≥TR150


XPS 300 NI
Image 136

The plates XPS 300 NI of extruded polystyrene, compressive strength of 300 kPa with a rough surface ("wafer") and flat edges are intended for installation by gluing and with poured concrete, and in those cases, if bonding mortars, plaster or other coating, are directly applied onto them. They are intended primarily for:

  • isolation of facade footers
  • making the roof overhangs on pitched roofs
  • thermal insulation of external walls of the building from the inside
  • insulation of walls of the building in a way of "lost formwork"
  • prevention of thermal bridges (edges of floor slabs, roof moldings, concrete corners etc.).
2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate size (mm):

1250x600

net area (m2):

0,75

thickness (mm):

20

30

40

50

60

80

100

120

140

thermal conductivity (W/m.K.):

0,033

0,034

0,036

0,037

thermal resistance (m2.K/W):

0,60

0,85

1,15

1,45

1,75

2,20

2,75

3,20

3,75

quantity in a package (m2):

15,75

10,5

7,5

6

5,25

3,75

3

2,25

2,25

quantity in a pallet (m2):

189

126

90

72

63

45

36

31,5

27

unique tag code:

XPS EN 13164-T1-CS(10/Y)300-WL(T)0,7-WD(V)3-DS(70,-)-DLT(2)5-fTCD1


XPS 300 NL
Image 132

XPS 300 NL plates of extruded polystyrene, with the compressive strength of 300 kPa with a rough surface ("wafer" structure) and the edges of step switching are intended for installation by gluing and watering with concrete, and in cases when they are directly applied with bonding mortars, mortar or other layers. They are intended primarily for:

  • Insulation of façade footers
  • making the roof overhangs with pitched roofs
  • thermal insulation of external walls of the building from the inside
  • insulation of walls of the building as "lost formwork"
  • prevention of thermal bridges (edges of floor slabs, roof moldings, concrete corners etc.).
2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate resistance (mm):

1265x615

net area (m2):

0,75

thickness (mm):

30

40

50

60

80

100

120

140

thermal conductivity (W/m.K.):

0,034

0,036

0,037

thermal resistance (m2.K/W):

0,85

1,15

1,45

1,75

2,20

2,75

3,20

3,75

quantity in a package (m2):

10,5

7,5

6

5,25

3,75

3

2,25

2,25

quantitiy in a pallet (m2):

126

90

72

63

45

36

31,5

27

unique tag code:

XPS EN 13164-T1-CS(10/Y)300-WL(T)0,7-WD(V)3-DS(70,-)-DLT(2)5-fTCD1


TERRESTRIH EPS T PLATES
Image 129

Elasticated EPS boards TERRESTRIH EPS T are used for insulation from impact sounds in floating floor systems. They are installed by loose laying, continuously, apart from the installation, directly on the construction or on the groundwork with additional thermal insulation of EPS 100. When installing, we must follow the instructions for installation, the applicable legislation and codes of practice.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102.

 

EPS-EN  13163-L(3)-W(3)-T(0)-S(5)-P(5)-BS50-CP3-DS(N)5-SD(15-40)

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate thickness: 12,22,33,43,53mm
panel size: 100 x 50cm
unit of measure: m2
PACKAGING  
packages in PE foil: cca 0.30m2
pallet:  
thermal conductivity λD:

0,043 W/m.K

dynamic stiffness:

15-40 MN/m3

Improvements in sound insulation*

LW,R:26-30 DB

*Improvments in the insulation of impact sound delta LW, R (dB) with mass greater than or equal to 75 kg / m2

STIROTRAK
Image 130

Elasticated EPS edging strip STIROTRAK used for insulation of impact sound as a separating layer between the floor and the perimeter walls (narrow strips) or insulating impact sound design on floating floors (tape widths of 50 and 100 cm). Stirotrak is installed considering the mode of use of mechanical fasteners, PU glue or free installation. When installing, we must follow the instructions for installation, the applicable legislation and codes of practice.

 

The product is in accordance with BAS EN 13163. Class E, reaction to fire, in accordance with BAS EN 13501-1 or B1 according to DIN 4102.

 

EPS-EN  13163-W(3)-T(2)-DS(N)5-SD(1)

2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

plate thickness: 5-15 mm
panel size: 6cm - 100cm
unit of measure: m
PACKAGING  

reels in PE foil wrapped in paper

 
pallet:  cca 0.25m2
dynamic stiffness:

30 to 40 MN/m3

thermal conductivity λD:

0.039 W/m.K


EPS SLOPED BOARDS
Image 131

SLOPED BOARDS are used in floor systems of flat roofs, for the smooth runoff  of storm water. Possible angles are 0.5%, 1%, 1.5%, 2%, and 3% etc. The range of compressive strength is between 70 and 200kPa.

 

According to the order.


2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png


EPS SKIRTING
Image 137

EPS angle batten is used for preventing the bending of welding strips at an acute angle at the transition from the horizontal to the wall.
2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png


DECORATIVE FAÇADE PROFILES
Image 143

Facade profiles of Styrofoam allow the construction of the roof overhangs, decorative frames on the facade around the windows and details on the corners with no thermal bridges. Based on the specific order, the possibility of making a copy of the facade profile "stucco" with restoration of old buildings. Decorative facade profiles of Styrofoam are coated with a solid core layer on the visible side. This core layer provides the profile with strength and somewhat more rugged structure, and protects against UV radiation and weather conditions, and ensures good adhesion of the final plaster.
2000px-Conformit%C3%A9_Europ%C3%A9enne_(logo).svg.png

length: 1, 1,25 and 2 m
window profiles:  
below the window profiles:  
edge profiles:  
drip profiles:  
coping:  
above the window profiles:  
48 48